kn/m2中文表達的是什么意思

　　kn/m2阿紫日常生活中也不算是常用，但是仍然有必要知道它中文表達的意思是什么。為此百分網小編為大家?guī)碛⑽膋n/m2表達的中文意思。

　　kn/m2表達的中文意思

　　是壓強單位，相當于千帕

　　根據：p=F/S

　　F單位是：N

　　S單位是：m2

　　所以：1N/m2=1Pa

　　1kN/m2=1kPa

　　kn/m2的雙語例句

　　1. The corresponding technical measures are used in design and construction procedures, from which good technical and economic benefits have been obtained, and the technical measures and research results provide reference for readers.

　　頂蓋板構造層中設有保溫層，保溫層上下設有防水層，廣場地面為花崗巖面磚。其構造層及板底管道重glk=4·75kN/m2，板面活載考慮消防荷載取20kN/m2。板-柱結構按等代框架分析各控制截面內力考慮活載的最不利

　　2. The frictional resistance obtained from the research is between 500 and 800 kN/ m2 for bonded length around 1-4 m and overburden depth around

　　本試驗傾斜地錨在錨碇段1~4 m，覆土深度在2~3.5 m變化下，得到摩擦應力都集中於500~800 kN/m2之間。

　　3. The designed load of the building floor is 5.0 KN/m2, which may support production with large machines.

　　廠房樓層的設計荷載為5.0 KN/m2，可供大型機械制造加工業使用。

　　4. In the Bozhong Shoal the maximum tidal velocity is 1.2~1.6 knots and the absolute value of M2 tidal current ellipticity is larger than 0.4, which indicates that rotation of tidal currents increases so as to form tidal sand sheets.

　　渤中淺灘表層最大流速為1.2～1.6kn，M2分期橢率絕對值大于0.4，潮流旋轉性強，形成潮流沙席。

　　5. The complete bipartite graph Km 1, m2, product Km × Kn and sum Km + Kn are discussed here.

　　探討了完全二部圖Km1，m2，完全圖卡氏積圖Km×Kn和完全圖并圖Km+Kn的表示數。

　　kn的例句

　　1. Bend spindle bearing: top models 3519/600 (600 mm × 800mm × 205mm thick) Lower Model 351922 (460 mm × 620mm × 174mm thick) Note: The top rated bearing 3519/600 dynamic load 2772 KN, rated static load 5832 KN; weight of 256 kg.

　　彎管主軸軸承：上部型號3519/600(600mm×800mm×205mm厚)下部型號351922(460mm×620mm×174mm厚)注：上部軸承 3519/600額定動載荷2772KN，額定靜載荷5832KN;重量256kg。

　　2. Cutting equipment: 5, 000 KN bar shearing machine, disk saws, multiple band saw. Baita Forging Co., Ltd.

　　下料設備：有5000千牛棒料剪切機、圓盤鋸、多臺帶鋸。

　　3. The KN should as be as dry as possible, as well, as it was observed that the dextrose appeared to draw moisture from the KN over a period of some days.

　　該千牛，應作為被干盡可能，以及，正如有人指出，葡萄糖似乎吸取水分從千牛一個時期一些日子。

　　4. The maximum allowed impact force is 12 KN 2640 lbs.

　　單繩最大沖擊力為12 KN 2640 lbs。

　　5. Label. The maximum allowed impact force is 12 KN 2640 lbs.

　　的卷標。單繩最大沖擊力為12 KN 2640 lbs。

　　6. The reactive Turquoise Blue KN-G adsorbed on SLBA could be recovered with a mixture of alcohol, dicyandiamide-formaldehyde polycondensate and HCl aqueous solutions.

　　吸附在SLBA吸附劑上的活性翠蘭可用乙醇、雙氰胺-甲醛縮聚物和鹽酸混合物解析，解析率可達98.7%。

　　7. In 2008, regardless of lots of adverse effect from both home and abroad, KN succeeded in keeping growing quite fast at a stable pace by achieving an annual sales income excluding tax RMB 0.316 billion, 22% more than the year 2007, in which RMB 35.93 million is net profit and the amount of all kinds of taxes is RMB 29.95 million.

　　2008年，公司克服了國內外諸多不利因素影響，依然保持平穩較快增長，全年實現不含稅銷售收入3.16億元，比2007年增長22%;實現凈利潤3593萬元，實現各種稅收2995萬元。

　　8. In this thesis, intensity and rigidity analysis of the frame structure of 3150kN MPF press has been studied.

　　對 3150kN 多點成形壓力機機架的'強度和剛度分析是本文的主要研究?jī)?nèi)容之一。

　　9. In this thesis, intensity andrigidity analysis of the frame structure of 3150kN MPF press has been studied.

　　對 3150kN 多點成形壓力機機架的強度和剛度分析是本文的主要研究?jī)?nèi)容之一。

　　10. The company has forging equipment: 1, 3, 5 tons of forging hammer, 750, 560, 400, 250 kilograms of free forging hammer, 6300, 300 KN friction press.

　　公司具有鍛壓設備：1、3、5噸液模鍛錘，750、560、400、250公斤自由鍛錘，6300、300千牛摩擦壓力機。

　　11. QTZ80(5613) tower crane: Rated moment of lifting:800KN. m, the max lifting weight:8t, the max range:56m.

　　QTZ80(5613)塔機額定起重力矩800KN.m，最大起重量8T，最大工作幅度56米。

　　12. S he can let me feel comfortable and l earning to kn owledge.

　　銀燕懸灸真好，我可以在一邊灸一邊學到懸灸知識。

---